WARNING

ADAPTIVE CRUISE

If your vehicle has adaptive cruise, please ensure that your adaptive cruise is working correctly once the Ranch Hand bumper is installed. Adaptive cruise may need to be cleaned or adjusted to ensure it functions properly. See your owner’s manual for care of the adaptive cruise.

SPECIAL CARE

Special care should be exercised in the handling, storage and installation of Kaspar Ranch Hand equipment. The actual weight of each piece of equipment will vary depending on style and model. The weight of the equipment is sufficient in volume to warrant special care, assistance and in some instances, the use of mechanical equipment during the transfer and installation of the equipment. Do not assume a position directly under the equipment during installation. Be sure the equipment has been connected and stabilized during installation to prevent falling or shifting of positions. Periodically check tightness of bolts to make sure they are tight, and unlikely to fail.

SAFETY

• In order to help you make informed decisions about safety, we have provided installation instructions and other information.
• These instructions alert you to potential injury hazards
• Please do a job safety analysis before each task to identify potential hazards for your situation and remove/protect against them.
• You must use your own good judgment.
• Read and understand all safety precautions and instructions before installing this product

HAZARD

FAILURE TO OBSERVE THESE INSTRUCTIONS COULD LEAD TO SEVERE INJURY OR DEATH.

• Always remove jewelry and wear eye protection.
• Always use extreme caution when jacking up a vehicle for work. Set emergency brake and use tire blocks. Locate and use the vehicle manufacturers designated lifting points. Use jack stands.
• Always use appropriate and adequate care in lifting components into place.
• Always insure components will remain secure during installation and operation.
• Always wear safety glasses when installing this kit. A drilling operation will cause flying metal chips. Flying chips can cause serious eye injury.
• Always use extreme caution when drilling on a vehicle. Thoroughly inspect the area to be drilled (on both sides of material) prior to drilling, and relocate any objects that may be damaged.
• Always use extreme caution when cutting and trimming during fitting.
• Always tighten all nuts and bolts securely per installation instructions.
• Always route electrical cables carefully. Avoid moving parts, components that become hot and rough or sharp edges.
• Always insulate and protect all exposed wiring and electrical terminals.
• Always perform regular inspections and maintenance on mounts and related hardware.